Tweet
Nice , you spend alot more time making it look all straight and purrrty than I do
Rules -PLEASE READ!
Forum rules can be found here:
Added rules:
* No flaming or insulting of other members. You will get one warning via a private message. Repeat offenses will result in being banned. (We are quite serious about this folks).
* Vendor bashing will not be tolerated. You will get one warning via a private message. Repeat offenses will result in being banned.
* When posting, try to use descriptive titles for your threads to enhance the searchability of the site. Thread titles such as "Help Me" or "Dang this sucks" should NOT be used. Instead try titles like 'Need Help with Sights', 'How to Perform Stock Refinish', or 'Vibration in Handguard". This will help other people search the site with better accuracy and make it easier for people to help you out.
* Everyone has a personal opinion and they will often differ from others. If you get into an argument over something, debate the issue, not the member. If you feel the need to get into a heated discussion with someone, send them a private message. Personal debates on the forum will not be tolerated.
* Do NOT post copyrighted material on this Forum without consent of the author. This could be from another website, or a book that you personally own. The owner/Admins of this site will not be held liable for any copyright infringement of this type, and as such, will prevent (to the best of our ability) it's posting in public. This is for the protection of ALL members.
* Do NOT post any messages that are obscene, vulgar, sexually-orientated, hateful, threatening, or otherwise violate any laws. These types of messages will not be tolerated. You will get one warning via a private message. Serious offenses may result in immediate permanent suspension. Repeat offenses will result in being permanently suspended.
* Avoid thread hi-jacking. Moderators will be looking for this and will more than likely split the topic if it gets too drastic, as well as take appropriate action where deemed necessary, to include deleting posts and/or enforcement action.
Please do not post the same question or post across multiple forums, or in the same thread. The best way to get the answers you are searching for is to post a clear single question in the appropriate forum and be patient, Replies will come. If you are in a hurry for a particular answer try using the search button or reading through replies to similar questions. It may just contain the information that you need. No need to post the same information again and again as this just clogs up threads/sub-forums.
Do not bump non-Marketplace threads as that can clutter the front page of a discussion forum. Posts bumping discussion threads will be deleted.
* Any members advertising their wares on the site without expressed permission will get banned. Personal items for sale in the classifieds are ok as long as the meet the criteria laid out in the site rules.
* Do not post any info, posts or threads regarding the process of going to the estore and artificially placing a large number of items in your cart simply for the purpose of seeing what inventory remains of an item carried on the estore!
This activity slows down the estore and can cause problems with it crashing, errors with people's orders, and inventory errors, particularly during periods of high demand/traffic.
Anyone making such posts on the forum will be warned once, then have their forum privileges suspended at least temporarily for a second violation. Further violations can result in permanent suspension.
* There will be no posting of links to, or copying information from listings on outside auctions/commercial sites, i.e. -- Gunbroker, Ebay, Armslist, Craigslist, Reddit, gun trader sites, etc, that are still active/live. We will not provide a platform for members to promote said auctions as there is no viable way to determine whether they or someone they know has a stake in the auction. Posts with this information will be removed. Continual violations will result in suspension of forum privileges. You may link to closed/completed auctions in the sake of education and learning.
* Users who post fake information, i.e. - name, location, in their profile, or otherwise provide/post false information/data about themselves will be instantly banned. Users who register multiple usernames will also be removed.
* Your account may be revoked at any time for any reason.
Generally, the following enforcement policy will apply:
1st offense - warning
2nd offense - banned for one week to six month
3rd offense - banned for one year
4th offense - banned permanently
** Depending on the nature of the offense/rule violation, first offense can result in ANY of the above enforcement actions.
-------------------------------------------------------------------------------------------------------------------------------------------------
ADDITIONAL RULES, TO INCLUDE MARKETPLACE/CLASSIFIED AD RULES:
1. Profile Requirements
To start a sale, buy or trade thread anywhere in the Marketplace, your Profile must contain:
A. Your FIRST and LAST name as well as your STATE of residence. Your profile privacy settings must be set to at least allow registered users the ability to view your profile info, i.e. - Not set to "Friends only."
B. You must "enable receive email and PM’s" in your Control panel if you intend to buy or sell.
Additionally, you must have a valid email address listed in your registration profile (which can only be viewed by moderators/admin in the vBulletin master page).
Users with obvious fake names, or using false names in their profile will be permanently removed from the forum without warning.
PLEASE NOTE: When a member has failed to put their full names and location in their profile, their ads will be deleted WITHOUT NOTICE. You are responsible enough to be involved in firearm activity, so you can be responsible enough to read and understand the forum rules. The posted rules ARE your notice as they are posted throughout the forum. Threads/ads will be restored once a member has updated their profile with first and last name, and state.
2. The Marketplace is intended SOLELY for the mutual benefit of forum members as a resource to support each other's collecting and/or shooting goals.
It is NOT intended for, and will NOT be used by members as a repeated, for-profit venture/operation. This includes:
A. Purchasing items from members on the forum, then posting them for sale at a markup/profit on other commercial sites, i.e. – eBay, Gunbroker, etc.
B. Reselling items at a considerable markup that were recently purchased from CMP.
Members found to have clearly abused this policy will lose the ability to post in and use the Marketplace, and potentially have their forum privileges suspended, temporarily or permanently.
3. You may only list personally owned items, and/or request/WTB items for yourself. “Selling (or buying) this for a friend/family member” ads, and 3rd-party sales/purchases are prohibited.
Additionally, NO posting or linking to listings on eBay, Craigslist, Gunbroker, Reddit, or other outside auction/commercial sites. We will not have the items placed here also. List your product here, try to sell it here, then take it to eBay, Craigslist, Gunbroker, auction-arms, etc.
4. There will be no “auction style” selling here…If you post an item for sale and it says anything like "I will take the highest offer" it will be removed.
We ask that you list your item on just one forum, so there is not confusion and/or issues with an item being sold on another forum when someone attempts to purchase it here. If you do list and sell on another forum, it is your responsibility to immediately update your ad on our forum…if you do not, your privilege to post in the Marketplace and even the forum itself may be suspended, at least temporarily.
NOTE REGARDING 1911 PISTOLS PURCHASED FROM CMP:
If you are considering selling a 1911/1911A1 you acquired directly from CMP, you MUST obtain approval from CMP1911ADMIN before listing it on the forum as purchasers of these weapons are not allowed to resell them as a condition of the purchase. You may reach him via PM or email: [email protected]
5. Vendors (or people selling large quantities of the same item as part of a commercial venture) must first contact a moderator or admin.
6. Omission of information is also known as fraud. It is wholly the responsibility of the person listing an item to describe it ACCURATELY and TRUTHFULLY.
Example: If you are selling a rifle stock that has a 9 inch crack in it you need to disclose that information to the buyer. Do not describe the item or tell the buyer that the stock has "light scratches" only.
If we determine that you defraud a member by failing to disclose facts about your items, your access to this section will be restricted and you may be permanently banned from the forum.
7. CLASSIFIED AD REQUIREMENTS
A. Briefly describe your item in the title, along with WTS, WTT or WTB.
B. We do not have any rules regarding notification of a purchase or trade in an ad...it can be accomplished via a post on the thread, a PM, an email, a phone call, a pigeon carrier, etc. However, if you set the terms of your sale, you must follow them! We do not require or enforce any conditions of purchase; however, if a member violates their own terms then they are subject to at least suspension from the Marketplace section. For example: If you say, "First 'I'll take it' gets it," and sell to someone via PM or email without updating your ad and someone posts they'll take it, that's on you. We will not be party to a dispute, but you WILL lose your privilege to post in the Marketplace as a minimum since you failed to follow your own conditions.
C. You must list a price, and make it easily visible, not just lost in the description. Ads without a price will be deleted. It is ok to list a price and OBO (or best offer); however, no auction-style listings
D. As noted in item #4, provide ALL and ACCURATE details. i.e color, size, caliber, year, make, model, condition, defects, etc
E. Post pictures, or at least the links to them. If you are unable to post pics, then make them available via e-mail.
F. List shipping, pick-up or delivery options for the buyer, as well as cost.
G. Be sure to mark your ad as "SOLD" once the items are sold.
8. Do not bump ads older than 90 days without moderator approval. Ads older than 90 days will be locked if they get bumped.
9. Do not bump an ad more than once within a 24-hour period. Ads bumped multiple times within 24 hours will be locked or deleted. Members who continually do this will have their ads locked or deleted, and will lose your privilege to post in the Marketplace.
10. Remove previous bump posts so as to keep the size of the threads to a minimum. Nobody wants to have to search through 4+ pages of "Bump" or "ttt" posts simply to find information on the item listed.
If not removed, mods will remove them and/or delete the thread if it gets out of hand.
11. If you commit to buy or sell, please contact the seller or buyer within 24 hours with a PM or email to make arrangements.
12. If an item is sold, please mark the thread as such. This will help eliminate the old threads coming back up, as well as help those looking for specific items.
13. For WTB items anywhere in the Marketplace:
- Only respond to a WTB ad if you possess the requested item or have specific knowledge of that item’s availability. For example, do not post, “Check eBay” or “Check Gunbroker.”
- Once you have found/purchased the item(s) desired, delete the thread so as to not waste other members' time and allow for other threads to have visibility.
14. Keep the classified threads clean of extraneous/fluff comments and questions, regardless of how innocent or praiseworthy. This prevents derailing the thread and generating wasteful, opinionated discussions, as well as surreptitious bumping of threads.
If you have a technical or knowledge question relating to a listed item, start a new thread or search and add to an existing thread.
If you want to thank or praise a seller or item, DON'T do it in the sale thread as it unnecessarily bumps a stale thread, and said comments will be deleted. Instead, do the person the courtesy of posting in the Buyer/Seller Feedback section here:
Basically, if you don't have a question DIRECTLY related to a sale/trade/purchase of a specific thread, don't post! And this particularly applies to stomping a member’s ad concerning their asking price as there is a tendency to post negative replies when someone lists an item for sale that others consider overpriced.
We will not tolerate members stomping another member's ad concerning their asking price.
This also includes posting low-ball offers. If you want to make an offer lower than the asking price, even if it states OBO, do it via PM or email.
If an item is sold and the listing member deleted the price (which is their prerogative) and you want to know what the price was, do NOT post in the thread…send the member a PM.
Those who continually stomp or hijack other member's ads will face temporary, and even permanent suspension of their forum privileges.
15. No duplicate or multiple threads in different sections for the same item. Pick one section, the most applicable, and post there. Additional duplicate threads will be deleted.
16. You may not use the signature block function to solicit purchases, trades and/or sales. That is why we have the Marketplace...post a thread with your specific WTB, WTS, WTT ad.
You may have up to two lines stating you are looking or searching for a particular rifle/weapon and serial number.
As with individual posts, signature blocks/lines are subject to the same forum rules and will be handled accordingly if they violate any forum rules, policies/procedures or take up too much room of a post.
OTHER TIPS/GUIDELINES
- Buyers and Sellers should verify each other’s identity before sending money and/or products. If possible, get each other’s phone number and have a quick conversation to confirm the transaction details.
- As a suggestion: sellers should consider using delivery confirmation to avoid conflicts from buyers; saying they never received the products.
- Buyers, get to know the seller a little before you blindly send cash. If something does not seem right; it probably isn't. If something seems too good to be true; it probably is. Contact a moderator or report a thread/post that appears to be a scam.
- Respect fellow members. This section is a great place to support/help out fellow members and occasionally make new friends. Please be respectful to your fellow members. Maybe try selling here to a member instead of eBay, maybe save them a buck or two. If you have any questions, problems or concerns feel free to contact a moderator or admin.
- We do not require members to keep ads, or keep a listing price in the thread. It is your ad, so you are free to delete it at your discretion, as well as remove the asking price if you so desire. If someone is curious about the price for what an item sold, contact the seller via PM…do NOT post in thread.
- Lastly, don't forget the <b>Buyer/Seller Feedback section</b>
Be sure to express a good or bad experience with your buyer or seller, and let others know what to expect. Also be sure to check there for a member if you are concerned BEFORE you buy.
MODERATION RULES/ENFORCEMENT
1. All spammers get banned instantly and permanently.
2. Inappropriate or out of hand threads shall be closed with or without reason posted for the closure or deleted at the discretion of the Mods/Admins.
3. If you cannot follow the rules set forth, your posts may be deleted, removed, or edited by the Moderators.
4. If you repeatedly do not follow the rules set forth, you will be banned from this section or from the CMP Forum for any length of time from 2 days to permanently, at the discretion of the Moderators.
NOTE: These rules can change at any time. Administrators and Moderators have the right to make any decision that fits the website and its users.
DISCLAIMER
The CMP, any of its staff and forum administrators/moderators assume NO liability or responsibility for Marketplace transactions. Members will use at their own risk, and CMP will not be responsible for any disputes or claims between members involving a transaction.
The Civilian Marksmanship Program forum is intended primarily to be a technically-oriented website for professional, courteous, and intellectual discussion of CMP matches, activities, firearms and related events. We are an online community founded by enthusiasts, for enthusiasts, of all ages and walks of life. Remember that we have youth CMP participants who view this site. Please enjoy your stay and with your help, we can make the CMP Forums safe for all.
The opinions and posts on this site do not necessarily reflect those of The Civilian Marksmanship Program.
If you have any questions, please contact a Moderator
CMP Staff
Added rules:
* No flaming or insulting of other members. You will get one warning via a private message. Repeat offenses will result in being banned. (We are quite serious about this folks).
* Vendor bashing will not be tolerated. You will get one warning via a private message. Repeat offenses will result in being banned.
* When posting, try to use descriptive titles for your threads to enhance the searchability of the site. Thread titles such as "Help Me" or "Dang this sucks" should NOT be used. Instead try titles like 'Need Help with Sights', 'How to Perform Stock Refinish', or 'Vibration in Handguard". This will help other people search the site with better accuracy and make it easier for people to help you out.
* Everyone has a personal opinion and they will often differ from others. If you get into an argument over something, debate the issue, not the member. If you feel the need to get into a heated discussion with someone, send them a private message. Personal debates on the forum will not be tolerated.
* Do NOT post copyrighted material on this Forum without consent of the author. This could be from another website, or a book that you personally own. The owner/Admins of this site will not be held liable for any copyright infringement of this type, and as such, will prevent (to the best of our ability) it's posting in public. This is for the protection of ALL members.
* Do NOT post any messages that are obscene, vulgar, sexually-orientated, hateful, threatening, or otherwise violate any laws. These types of messages will not be tolerated. You will get one warning via a private message. Serious offenses may result in immediate permanent suspension. Repeat offenses will result in being permanently suspended.
* Avoid thread hi-jacking. Moderators will be looking for this and will more than likely split the topic if it gets too drastic, as well as take appropriate action where deemed necessary, to include deleting posts and/or enforcement action.
Please do not post the same question or post across multiple forums, or in the same thread. The best way to get the answers you are searching for is to post a clear single question in the appropriate forum and be patient, Replies will come. If you are in a hurry for a particular answer try using the search button or reading through replies to similar questions. It may just contain the information that you need. No need to post the same information again and again as this just clogs up threads/sub-forums.
Do not bump non-Marketplace threads as that can clutter the front page of a discussion forum. Posts bumping discussion threads will be deleted.
* Any members advertising their wares on the site without expressed permission will get banned. Personal items for sale in the classifieds are ok as long as the meet the criteria laid out in the site rules.
* Do not post any info, posts or threads regarding the process of going to the estore and artificially placing a large number of items in your cart simply for the purpose of seeing what inventory remains of an item carried on the estore!
This activity slows down the estore and can cause problems with it crashing, errors with people's orders, and inventory errors, particularly during periods of high demand/traffic.
Anyone making such posts on the forum will be warned once, then have their forum privileges suspended at least temporarily for a second violation. Further violations can result in permanent suspension.
* There will be no posting of links to, or copying information from listings on outside auctions/commercial sites, i.e. -- Gunbroker, Ebay, Armslist, Craigslist, Reddit, gun trader sites, etc, that are still active/live. We will not provide a platform for members to promote said auctions as there is no viable way to determine whether they or someone they know has a stake in the auction. Posts with this information will be removed. Continual violations will result in suspension of forum privileges. You may link to closed/completed auctions in the sake of education and learning.
* Users who post fake information, i.e. - name, location, in their profile, or otherwise provide/post false information/data about themselves will be instantly banned. Users who register multiple usernames will also be removed.
* Your account may be revoked at any time for any reason.
Generally, the following enforcement policy will apply:
1st offense - warning
2nd offense - banned for one week to six month
3rd offense - banned for one year
4th offense - banned permanently
** Depending on the nature of the offense/rule violation, first offense can result in ANY of the above enforcement actions.
-------------------------------------------------------------------------------------------------------------------------------------------------
ADDITIONAL RULES, TO INCLUDE MARKETPLACE/CLASSIFIED AD RULES:
1. Profile Requirements
To start a sale, buy or trade thread anywhere in the Marketplace, your Profile must contain:
A. Your FIRST and LAST name as well as your STATE of residence. Your profile privacy settings must be set to at least allow registered users the ability to view your profile info, i.e. - Not set to "Friends only."
B. You must "enable receive email and PM’s" in your Control panel if you intend to buy or sell.
Additionally, you must have a valid email address listed in your registration profile (which can only be viewed by moderators/admin in the vBulletin master page).
Users with obvious fake names, or using false names in their profile will be permanently removed from the forum without warning.
PLEASE NOTE: When a member has failed to put their full names and location in their profile, their ads will be deleted WITHOUT NOTICE. You are responsible enough to be involved in firearm activity, so you can be responsible enough to read and understand the forum rules. The posted rules ARE your notice as they are posted throughout the forum. Threads/ads will be restored once a member has updated their profile with first and last name, and state.
2. The Marketplace is intended SOLELY for the mutual benefit of forum members as a resource to support each other's collecting and/or shooting goals.
It is NOT intended for, and will NOT be used by members as a repeated, for-profit venture/operation. This includes:
A. Purchasing items from members on the forum, then posting them for sale at a markup/profit on other commercial sites, i.e. – eBay, Gunbroker, etc.
B. Reselling items at a considerable markup that were recently purchased from CMP.
Members found to have clearly abused this policy will lose the ability to post in and use the Marketplace, and potentially have their forum privileges suspended, temporarily or permanently.
3. You may only list personally owned items, and/or request/WTB items for yourself. “Selling (or buying) this for a friend/family member” ads, and 3rd-party sales/purchases are prohibited.
Additionally, NO posting or linking to listings on eBay, Craigslist, Gunbroker, Reddit, or other outside auction/commercial sites. We will not have the items placed here also. List your product here, try to sell it here, then take it to eBay, Craigslist, Gunbroker, auction-arms, etc.
4. There will be no “auction style” selling here…If you post an item for sale and it says anything like "I will take the highest offer" it will be removed.
We ask that you list your item on just one forum, so there is not confusion and/or issues with an item being sold on another forum when someone attempts to purchase it here. If you do list and sell on another forum, it is your responsibility to immediately update your ad on our forum…if you do not, your privilege to post in the Marketplace and even the forum itself may be suspended, at least temporarily.
NOTE REGARDING 1911 PISTOLS PURCHASED FROM CMP:
If you are considering selling a 1911/1911A1 you acquired directly from CMP, you MUST obtain approval from CMP1911ADMIN before listing it on the forum as purchasers of these weapons are not allowed to resell them as a condition of the purchase. You may reach him via PM or email: [email protected]
5. Vendors (or people selling large quantities of the same item as part of a commercial venture) must first contact a moderator or admin.
6. Omission of information is also known as fraud. It is wholly the responsibility of the person listing an item to describe it ACCURATELY and TRUTHFULLY.
Example: If you are selling a rifle stock that has a 9 inch crack in it you need to disclose that information to the buyer. Do not describe the item or tell the buyer that the stock has "light scratches" only.
If we determine that you defraud a member by failing to disclose facts about your items, your access to this section will be restricted and you may be permanently banned from the forum.
7. CLASSIFIED AD REQUIREMENTS
A. Briefly describe your item in the title, along with WTS, WTT or WTB.
B. We do not have any rules regarding notification of a purchase or trade in an ad...it can be accomplished via a post on the thread, a PM, an email, a phone call, a pigeon carrier, etc. However, if you set the terms of your sale, you must follow them! We do not require or enforce any conditions of purchase; however, if a member violates their own terms then they are subject to at least suspension from the Marketplace section. For example: If you say, "First 'I'll take it' gets it," and sell to someone via PM or email without updating your ad and someone posts they'll take it, that's on you. We will not be party to a dispute, but you WILL lose your privilege to post in the Marketplace as a minimum since you failed to follow your own conditions.
C. You must list a price, and make it easily visible, not just lost in the description. Ads without a price will be deleted. It is ok to list a price and OBO (or best offer); however, no auction-style listings
D. As noted in item #4, provide ALL and ACCURATE details. i.e color, size, caliber, year, make, model, condition, defects, etc
E. Post pictures, or at least the links to them. If you are unable to post pics, then make them available via e-mail.
F. List shipping, pick-up or delivery options for the buyer, as well as cost.
G. Be sure to mark your ad as "SOLD" once the items are sold.
8. Do not bump ads older than 90 days without moderator approval. Ads older than 90 days will be locked if they get bumped.
9. Do not bump an ad more than once within a 24-hour period. Ads bumped multiple times within 24 hours will be locked or deleted. Members who continually do this will have their ads locked or deleted, and will lose your privilege to post in the Marketplace.
10. Remove previous bump posts so as to keep the size of the threads to a minimum. Nobody wants to have to search through 4+ pages of "Bump" or "ttt" posts simply to find information on the item listed.
If not removed, mods will remove them and/or delete the thread if it gets out of hand.
11. If you commit to buy or sell, please contact the seller or buyer within 24 hours with a PM or email to make arrangements.
12. If an item is sold, please mark the thread as such. This will help eliminate the old threads coming back up, as well as help those looking for specific items.
13. For WTB items anywhere in the Marketplace:
- Only respond to a WTB ad if you possess the requested item or have specific knowledge of that item’s availability. For example, do not post, “Check eBay” or “Check Gunbroker.”
- Once you have found/purchased the item(s) desired, delete the thread so as to not waste other members' time and allow for other threads to have visibility.
14. Keep the classified threads clean of extraneous/fluff comments and questions, regardless of how innocent or praiseworthy. This prevents derailing the thread and generating wasteful, opinionated discussions, as well as surreptitious bumping of threads.
If you have a technical or knowledge question relating to a listed item, start a new thread or search and add to an existing thread.
If you want to thank or praise a seller or item, DON'T do it in the sale thread as it unnecessarily bumps a stale thread, and said comments will be deleted. Instead, do the person the courtesy of posting in the Buyer/Seller Feedback section here:
Basically, if you don't have a question DIRECTLY related to a sale/trade/purchase of a specific thread, don't post! And this particularly applies to stomping a member’s ad concerning their asking price as there is a tendency to post negative replies when someone lists an item for sale that others consider overpriced.
We will not tolerate members stomping another member's ad concerning their asking price.
This also includes posting low-ball offers. If you want to make an offer lower than the asking price, even if it states OBO, do it via PM or email.
If an item is sold and the listing member deleted the price (which is their prerogative) and you want to know what the price was, do NOT post in the thread…send the member a PM.
Those who continually stomp or hijack other member's ads will face temporary, and even permanent suspension of their forum privileges.
15. No duplicate or multiple threads in different sections for the same item. Pick one section, the most applicable, and post there. Additional duplicate threads will be deleted.
16. You may not use the signature block function to solicit purchases, trades and/or sales. That is why we have the Marketplace...post a thread with your specific WTB, WTS, WTT ad.
You may have up to two lines stating you are looking or searching for a particular rifle/weapon and serial number.
As with individual posts, signature blocks/lines are subject to the same forum rules and will be handled accordingly if they violate any forum rules, policies/procedures or take up too much room of a post.
OTHER TIPS/GUIDELINES
- Buyers and Sellers should verify each other’s identity before sending money and/or products. If possible, get each other’s phone number and have a quick conversation to confirm the transaction details.
- As a suggestion: sellers should consider using delivery confirmation to avoid conflicts from buyers; saying they never received the products.
- Buyers, get to know the seller a little before you blindly send cash. If something does not seem right; it probably isn't. If something seems too good to be true; it probably is. Contact a moderator or report a thread/post that appears to be a scam.
- Respect fellow members. This section is a great place to support/help out fellow members and occasionally make new friends. Please be respectful to your fellow members. Maybe try selling here to a member instead of eBay, maybe save them a buck or two. If you have any questions, problems or concerns feel free to contact a moderator or admin.
- We do not require members to keep ads, or keep a listing price in the thread. It is your ad, so you are free to delete it at your discretion, as well as remove the asking price if you so desire. If someone is curious about the price for what an item sold, contact the seller via PM…do NOT post in thread.
- Lastly, don't forget the <b>Buyer/Seller Feedback section</b>
Be sure to express a good or bad experience with your buyer or seller, and let others know what to expect. Also be sure to check there for a member if you are concerned BEFORE you buy.
MODERATION RULES/ENFORCEMENT
1. All spammers get banned instantly and permanently.
2. Inappropriate or out of hand threads shall be closed with or without reason posted for the closure or deleted at the discretion of the Mods/Admins.
3. If you cannot follow the rules set forth, your posts may be deleted, removed, or edited by the Moderators.
4. If you repeatedly do not follow the rules set forth, you will be banned from this section or from the CMP Forum for any length of time from 2 days to permanently, at the discretion of the Moderators.
NOTE: These rules can change at any time. Administrators and Moderators have the right to make any decision that fits the website and its users.
DISCLAIMER
The CMP, any of its staff and forum administrators/moderators assume NO liability or responsibility for Marketplace transactions. Members will use at their own risk, and CMP will not be responsible for any disputes or claims between members involving a transaction.
The Civilian Marksmanship Program forum is intended primarily to be a technically-oriented website for professional, courteous, and intellectual discussion of CMP matches, activities, firearms and related events. We are an online community founded by enthusiasts, for enthusiasts, of all ages and walks of life. Remember that we have youth CMP participants who view this site. Please enjoy your stay and with your help, we can make the CMP Forums safe for all.
The opinions and posts on this site do not necessarily reflect those of The Civilian Marksmanship Program.
If you have any questions, please contact a Moderator
CMP Staff
See more
See less
-
"I am the master of my unspoken words, and a slave to those that should have remained unspoken. ... -
These pictures are great, and they definitely make me feel better. Thanks so much for posting!
My work isn't as clean as yours — this is my first foray into stock fitting — but at least I did the work in the same places you did.
Levisdad, Do the relief cuts on the barrel channel have to be symmetrical? As they are now, I can easily slip a dollar bill between the barrel and the stock, but the amount of wood removed is not the same on both sides because I didn't end up clearing out as much wood from the left side of the barrel channel as I did the right.
I had to clear out more on the right because, when I rubbed some grease on the op-rod to see where it was binding, it seemed to rub a little there, hence the more aggressive treatment. I didn't make them symmetrical because I figured that, since the barrel already seemed to have plenty of clearance according to the dollar bill test, why bother? However, I'll be the first to admit I could have been wrong! Photo below. The left top edge of the stock is lighter because I had to sand it a lot to open up some clearance between it and the bottom of the rear handguard.
<a href="http://s962.photobucket.com/albums/ae101/BenjaminWP/?action=view&current=DSC_0011.jpg" target="_blank"><img src="http://i962.photobucket.com/albums/ae101/BenjaminWP/DSC_0011.jpg" border="0" alt="Photobucket"></a>[IMG]
I'm including a photo of my work creating the gap between the receiver top bottom and top of the stock because I didn't sand all the way to that edge where the top edge of the stock drops down slightly and the interior of the stock widens into the cuts for the receiver legs. I stopped slightly before that. Should I sand to those edges or is this fine as it is?
[IMG]<a href="http://s962.photobucket.com/albums/ae101/BenjaminWP/?action=view&current=DSC_0006.jpg" target="_blank"><img src="http://i962.photobucket.com/albums/ae101/BenjaminWP/DSC_0006.jpg" border="0" alt="Photobucket"></a>[/IMG]Comment
-
Looks good to go. As long as you got some clearance in the right places it don't matter how it looks cosmetically or if it's symetrical.Comment
-
Odd that nobody mentioned this before but.........my recently arrived stock, {July14th} from Dupage is actually a Boyd's product! I suppose it's the thin stock type that Dupage mentions that there stocks are. It still needs a ton of work regardless!! All three pieces are stamped Boyd's! Kinda like buying a Cadillac with a Chevy motor!Comment
-
I like to have approx 1/8 inch clearance under the barrel in the barrel channel. The barrel will flex when fired and you want plenty of space under it"I am the master of my unspoken words, and a slave to those that should have remained unspoken. ...Comment
-
That's never been a secret, AFAIK. The first time I ever heard of Dupage, it was mentioned that they were reworked stocks that Boyds had made.Originally posted by lee sherman View PostComment
-
Orlando,
I have the problem of the stock ferrule being too high on a CMP Orange Birch Stock. I haven't worked on it yet nor have I looked at it much either, but plan to soon. I sometimes wonder if the problem isn't the placement of the stock ferrule, but rather the receiver leg cuts in the stock and how they locate the receiver and barrel in relation to the stock ferrule. Any thoughts on that?
DannyDanny
--------------------------------------------------------------
Looking for Rifles:
Springfield Armory 5,940,259, 5,840,184, 4,238,435 and 2,023,912.
Harrington & Richardson 5,549,399Comment
-
Only time I messed with the ferrule is when it set to high in the barrel channel itself"I am the master of my unspoken words, and a slave to those that should have remained unspoken. ...Comment
-
I can't really be sure what the cause of the problem is that I'm seeing, so I haven't worked with the stock yet. The problem is that the lower band and stock ferrule engagement surfaces are not engaging. The stock ferrule is too high up in the opening, or the lower band is too low in relation to the stock ferrule. I think that I will start to work with it again after the National Matches.Originally posted by Orlando View Post
DannyDanny
--------------------------------------------------------------
Looking for Rifles:
Springfield Armory 5,940,259, 5,840,184, 4,238,435 and 2,023,912.
Harrington & Richardson 5,549,399Comment
-
I have a question about the ferrule that goes on the front of the stock, the one the sling swivel is on. Do those normally have enough "give" so that you can back the screw out enough to allow the ferrule to open up a little, so that it can "clamp" itself in place when you tighten the screw back down?
On mine, I can barely back the screw off 1 turn, if even that much, the ferrule is at "full squeeze" and won't loosen up. I had to remove it by tapping it off with a hammer and punch. I have a new one on the way from FLASHOOTER, just haven't received it yet.
I ask because my new stock is certainly too big where that thing needs to mount, and I don't want to work the stock down too much there. Ain't touching it until the new ferrule is in my hands.Comment
-
Well, I don't have any pics yet, because mine isn't quite finished. But it's mighty close!!!
I bought the unfinished walnut WWII profile set from Dupage, which of course is made by Boyd's for Dupage. I found it to still be a little large, the wood was too proud around the buttplate and the handguard ferrules to suit me. So I got out my little block plane and started shaving 'er down.
I shaved down the sides of the buttstock to just a tad larger than the buttplate, then beveled the edges slightly to bring them down right to the buttplate. Same with the handguards. Took off quite a bit of wood, but just a little bit at a time. Taking care to maintain the rounded contours as much as possible.
Then I sanded everything smooth and pretty with 180 grit paper and a sanding block, then sanded with 220, and rubbed in four coats of 50/50 Pure Tung Oil and Mineral Spirits. Let it dry a few days, and just tonight I gave it a good 1 hour soaking with Fairtrimmers, which I burnished into the wood with a worn-out piece of 600 grit wet/dry sandpaper.
The four coats of tung oil gave the walnut a beautiful honey brown color, but I wanted to add just a little of the red "warmth" so I topped it off with the Fairtrimmers. The Tung oil slowed down the absorption of the Fairtrimmers enough that the change in color was very slight, but just noticeable. It's not real dark like Fairtrimmers on raw walnut would look, but I think it's very pleasing. At least to me. It doesn't have that deep brown reddish military look, I wanted to still see the grain of the wood.
I can't wait for it to cure a few days so I can apply a coat of Tom's 1/3 wax and assemble the rifle! I'll take some photos then. She has the new stock, a new gas cylinder, all new springs, and a new triggerguard (well, used but in better shape), so I hope and pray that she'll finally shoot right and won't short-stroke anymore. I also plan to take it to Chuckindenver and have him assemble the rear sight for me, I just can't seem to get it right.Comment
-
Excellent info for re-stocking the M-1. I am presently finishing up a Dupage re-stock project myself. I learned much in regard to M-1's and the in's and out's of a re-stock project. There is more to it than meets the eye. Total fitment of metal, tilt test corrections, etc. The CMP members have been most helpful with this stock upgrade. They all deserve much praise! LSComment
-
I'm sure I'll have some final fitment trimming to do, but that'll be easy to touch up. I just wanted to get the exterior of the stock oiled and sealed before I got greasy fingerprints on the raw wood from handling the action parts and fitting them. That was my plan anyway.
<EDIT>I couldn't wait, had to take some photos. Sunlight makes it look a little orange, which it isn't. I'll do some more later on.
Comment
-
Reworking CMP/Dupage/Boyds Stocks
I have done my third stock of the recent production of the Boyds/CMP/DuPage stocks and found the wood is very tight against the rear vertical surface of the trigger housing.
I am using a Dremel tool to remove about 1/32" of material so the wood does not pull up when the trigger housing is removed from the stock. I slightly chipped one today, because I forgot to relieve that area. No problem to fix, but in this incident it was a tiny chip.
So anyway here is an image and hopefully this will prevent some problems for you guys.
sparx
5
Comment
-
I know this is an "old" thread, but I found it extremely helpful in prepping my Boyd's stock. I received a SG SA; cleaned/lubed, took to the range, and she shot high and left with sights straight up at 50 yards. I had to crank the front sight to the left as far as it would go to get the windage even close, then would have had to use the rear sight. Something was obviously wrong. Tilt test revealed the op rod was binding everywhere on the stock, the trigger dent was present, the firing pin dent was present, the op rod wear marks on the stock and ferrule were present, and checking with a piece of paper showed the barrel must have been touching the stock when firing. I used a dremel and fine grit sanding drum to slowly blend the areas. The slight clearance between the receiver and stock was present, but VERY slight, so I touched it up just a bit with a wood block and 320 grit paper. The trigger assembly also bound on the #5 spot in Gus's photo. The front and rear handguards were okay.
Thanks for this thread.Comment
Comment